Browse Items (357 total)
- Collection: The Making of Todmorden exhibition
Sort by:
Frostholme Mill, Cornholme. - MOT00186
The horizontal cross compound steam engine, installed in 1896, was capable of driving up to 900 bhp and powered the whole of the factory by a rope pulley system.
Frostholme Mill, Cornholme. - MOT00185
Carson Whiteside, Chief Engineer. In 1959 the steam engine became redundant and in 1960 it was dismantled by a small gang headed by Corson Whiteside, the chief engineer. The flywheel was 20 ft in diameter and each spoke weighed over 19 cwt.
Frostholme Mill, Cornholme. - MOT00183
Built in 1860, the mill was enlarged and developed under the ownership of Joshua Smith Ltd who ran it from 1882 until well into the 1950s. At one time they employed over 700 people in Cornholme, primarily in the weaving industry.
After Joshua…
After Joshua…
Dinner Invitation - MOT00182
Invitation to a dinner given by John Fielden of Dobroyd Castle to celebrate the completion of the new engines at Waterside Works.
Waterside - MOT00181
A view across the 'New' shed at Waterside in 1912. Interior of the large weaving shed at Waterside in 1912. It is now the site of the Morrisons Supermarket.
Waterside Mill - MOT00180
During the hey-day of the weaving activities the sheds were powered by a pair of steam engines of 1,000 hp, which were named 'Sam' and 'John' after the two eldest surviving Fielden sons. The photograph shows Leslie Baron who was in charge of the…
Waterside c1866 - MOT00179
The three cottages in the centre of the picture were the homes and workplaces of the entrepreneurial Fielden family who moved there from Edge End in 1782. The various stages of expansion can be seen in the five-storey building which was a spinning…
Albion Mill - MOT00178
The beam engine which once powered Albion Mill, Halifax Road, formerly owned by John Dawson & Sons Ltd.
Albion Mill - MOT00177
The Lancashire boiler at Albion Mill, showing the coal hoppers.
Stoneswood Mill, Bacup Road, 1993. - MOT00176
Midgelden Clough flowing down the Bacup valley provided a ready source of water for the early cotton mills. Stoneswood Mill once formed one of the outside factories of Fielden Bros. but was given up more than a century ago, the spinning machinery…
Woodhouse Mill - MOT00175
Woodhouse Mill, built in 1832, was sited directly alongside the Rochdale Canal to take advantage of the transport facilities and process water. The small engine house can be seen on the left of the mill. The chimney was detached from the mill in…
Robinwood Mill and Nott Wood Viaduct, Lydgate. - MOT00174
Robinwood c1910, a panorama of industry and communications with the 13 arch Nott Wood Viaduct on the Todmorden-Burnley line, the so called Copy Pit Line. Robinwood Mill, built in 1834, and purchased by Fielden Bros. in 1844, became the centre of…
Woodhouse Mill, Todmorden - MOT00173
Woodhouse Mill, seen from the towing path of the Rochdale Canal, c. 1906. The three-storey terrace of houses was called Bank View. The improvements and inventions of Hargreaves' spinning jenny, Crompton's mule, and later, Cartwright's power loom…
Friths Mill, Bacup Road - MOT00171
Friths Mill, Bacup Road, built as a steam-powered cotton mill, finished its days as a sanitary pipe works.
The improvements and inventions of Hargreaves' spinning jenny, Crompton's mule, and later, Cartwright's power loom…
The improvements and inventions of Hargreaves' spinning jenny, Crompton's mule, and later, Cartwright's power loom…
Ramsden Wood Mill - MOT00170
Wood block printers at Ramsden Wood works. The man standing on the left of the table is Matthew Barr, of Walsden.
Ramsden Wood Mill - MOT00169
Clearing the water course at Ramsden Wood Clough, about 1900.
Ramsden Wood Mill, Walsden about 1870 - MOT00168
Originally built as a cotton spinning mill in the early 19th Century, the buildings were later converted to a print and dye works. The abundant water supply was the chief reason for the selection of the site, but the chimney which is situated on the…
Ramsden Wood Mill, Walsden about 1870 - MOT00167
Originally built as a cotton spinning mill in the early 19th Century, the buildings were later converted to a print and dye works. The abundant water supply was the chief reason for the selection of the site, but the chimney which is situated on the…
Water Power - MOT00166
Another Fielden Mill utilising water power with a unique system of three waterwheels, each fed by a stepped series of dams. This mill was later converted to steam power. Lumbutts Mill and Jumb Mill were interconnected by a conveyor system which…
Lumbutts Mill - MOT00165
Another Fielden Mill utilising water power with a unique system of three waterwheels, each fed by a stepped series of dams. This mill was later converted to steam power. Lumbutts Mill and Jumb Mill were interconnected by a conveyor system which…
Water Power - MOT00164
Another Fielden Mill utilising water power with a unique system of three waterwheels, each fed by a stepped series of dams. This mill was later converted to steam power. Lumbutts Mill and Jumb Mill were interconnected by a conveyor system which…
Water Power - MOT00163
Lumbutts Mill 1900s - In addition to the parent mill at Waterside, Fielden Bros owned several smaller mills in the valleys around Todmorden, almost all of which were used for spinning purposes. Two of these were situated in the Lumbutts Clough - the…
Water Power - MOT00162
Lumbutts in the 1900s.
Water Power. Jumps Mill, Lydgate - MOT00161
The larger building in this view is an original water-powered mill, which was never converted to steam power.
View over Walsden - MOT00160
Walsden, viewed from Gauxholme Stones, in the 1950s. the station just visible on the right. Clough Mill, in the foreground, is thought to be the first cotton mill in the Todmorden area. Through the years it has been occupied by a variety of trades…